Dealing With New And Used Embroidery Machines

By Yvonne Marino
Updated July 30, 2015
Read our Disclaimer

Dealing With New And Used Embroidery MachinesIf you're a beginner dealing with embroidery used machines or new machines, then learning how to get started can be similar to trying to figure out the automatic transmission in a car for the first time. It may seem strange, but the fact that there is less for you to do can be confusing in itself - as you have to get used to letting your machine do a portion of the work on your behalf. Fortunately, there usually isn't much difference between using one brand of embroidery machine or another. The only real changes will be in the additional features that are available. Nevertheless, setting up your machine may be complicated, so here are some tips when you're getting started with your very first used or new embroidery machine.

1. Prepare The Things You Need

Buying a new embroidery machine can be useful as it may come with a wide variety of extra bits and pieces that embroidery used machines would not have: such as the thread, bobbin, stabilizer, needle, and so on. If you're new to using an embroidery machine, then you may not remember to check for a stabilizer. However, these pieces can be incredibly useful, as they help to hold the fabric in place and make sure that you get the pattern right the first time around.

Some newer embroidery machines may also come with tutorial videos and operating manuals, which you should read whenever possible, as these will give you further information about how to use your new product, and which needles are the most appropriate for which fabrics. If you're using a used machine, you should be able to find similar videos, articles, and guidance online with a little searching.

2. Set Up Your Machine

Setting up embroidery used machines or brand new ones can be similar to dealing with the construction of a modern sewing machine. There are actually many products out there today that combine embroidery machines with sewing machine functions so that you can access the best of both worlds. If you have a combined machine, you will need to remove the sewing section and ensure that the embroidery arm is properly installed before plugging in the machine and turning on the power. You may also find that you need to connect your machine to a computer through a USB cable.

3. Choose Your Needle

Finally, before you go ahead with your embroidery, you'll need to be sure that you're using the right needle for the job. Remember that there are certain needles that have been designed specifically for embroidery threads, and you should choose your ideal size according to the weight of your fabric. Your needle should be adept at moving the thread throughout the fabric without causing any damage. Often, round shank needles are used in commercial embroidery machines, whereas flat-sided shank needles are utilized in domestic machines. Some embroidery used machines will come with needles pre-installed, and you should be able to determine which you have through the use of a number system. Typically, the higher the number of your needle, the larger the eye will be, but the more accurate the stitch will be.





* Disclaimer:
This site offers information designed for educational purposes only. You should not rely on any information on this site as a substitute for professional medical advice, diagnosis, treatment, or as a substitute for, professional counseling care, advice, diagnosis, or treatment. If you have any concerns or questions about your health, you should always consult with a physician or other health-care professional.